![background image](http://html.mh-extra.com/html/icom/ic-a4/ic-a4_instruction-manual_612418021.webp)
17
10
SPECIFICATIONS
D
General
• Frequency coverage
: TX
118 to 136.975 MHz
RX
108 to 136.975 MHz
• Mode :
AM
(6K00A3E)
• Number of memory channels : 19
• Acceptable power supply
: 9.6 V DC nominal
(negative ground)
(authorized battery packs)
• Usable temp. range
: –10˚C to +50˚C
• Frequency stability
: ±10 ppm (0˚C to +50˚C)
• Current drain
:
Tx
1.2 A (CW) max.
0.7 A (CW) typical
Rx
55 mA typical (at stand by)
250 mA max.
(at AF max.)
• Antenna impedance
: 50
Ω
(nominal)
• Dimensions :
58(W)
✕
140.5(H)
✕
32.3(D) mm
(projections not incl.)
• Weight (with BP-195)
: 425 g
D
Transmitter
• Output power
: 3.7 W (PEP) typical
1.0 W (CW)
typical
• Modulation
: Low level modulation
• Modulation limiting
: 80 to 100 %
• Audio harmonic distortion : Less than 10 %
(at 60 % modulation)
• Hum and noise ratio
: More than 35 dB
• Spurious emissions
: More than 60 dB
D
Receiver
• Receive system
: Double conversion
superheterodyne
• Intermediate frequencies
: 1st
28.95 MHz
2nd
450 kHz
•Sensitivity (with 50
Ω
load)
: 1 µV (at AM 6dB S/N)
• Squelch sensitivity
: 1 µV
(with 50
Ω
load)
• Selectivity
: 8 kHz (at 6 dB)
25 kHz (at 60 dB)
• Spurious response
: More than 60 dB
• Audio output power
: 500 mW (at 10% distortion
(at 9.6 V DC)
with an 8
Ω
load)
• Noise and hum
: More than 25 dB
• External SP connector
: 3-conductor 3.5 (d) mm/8
Ω
All stated specifications are subject to change without
notice or obligation.
IC-A4#01 IM 01.12.5 5:14 PM Page 17 (1,1)