11
6
OTHER FUNCTIONS
■
Initial set mode
Initial set mode is accessed at power ON and allows you to
set seldom-changed settings, in this way you can “customize”
transceiver operations to suit your preferences and operating
style.
D
Entering initial set mode
q
While pushing [V/M] + [
], turn power ON.
• The transceiver enters initial set mode and “mn”, “bP” or “St” ap-
pears on the display.
w
Push[
Y
] or [
Z
] one or more times to select the desired
item as described below and at right.
e
Push [
] to select the desired condition.
r
Push [MW] or [PTT] to exit initial set mode and select the
previous operating mode.
D
Memory names
This item allows you to display a
memory name instead of fre-
quency.
• When a memory channel has
not been programmed with a
name, frequency indication ap-
pears instead.
D
Beep tones ON/OFF
Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.
D
Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.
•
Optional
OPC-752
HEADSET
ADAPTER
is required
.
■
Resetting the CPU
Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥
While pushing [V/M] + [MW] + [SCAN], turn power ON to
reset the transceiver.
• “CLEAR” appears briefly to indicate the CPU has been reset.
]
IC-A4#01 IM 01.12.5 5:14 PM Page 11 (1,1)
