8
4
SCAN OPERATION
■
Memory (lockout) scan
Memory scan repeatedly scans all programmed memory
channels, except those set as
lockout
channels.
q
Push [V/M] to select memory mode, if necessary.
• “
” appears.
w
Puch [SCAN] to start scan.
- To change the scan direction, push [
Y
] or [
Z
].
e
Push [SCAN] again to stop the scan.
MR
MEMORY LOCKOUT(SKIP) SCAN
SKIP
SKIP
Mch 1
Mch 7
Mch 2
Mch 4
Mch 3
Mch 5
Mch 6
Mch 8
Mch 19
Mch 11
Mch 10
Mch 9
■
VFO (Full) scan
VFO scan repeatedly scans between the VFO’s lowest
frequency and its highest frequency.
- To change the scan direction, push [
Y
] or [
Z
] during
scanning.
D
Scan resume condition
When a signal is received during scanning, the scan pauses
on the signal until it disappears, then resumes.
VFO SCAN (Full scan)
Scan
Jump
Start
highest
frequency
lowest
frequency
IC-A4#01 IM 01.12.5 5:14 PM Page 8 (1,1)
