![background image](http://html.mh-extra.com/html/icom/ic-a4/ic-a4_instruction-manual_612418014.webp)
10
5
MEMORY PROGRAMMING
■
Memory names
ï
Programming memory names
q
Select the memory channel to be programmed:
➥
Push [V/M] to select memory mode.
➥
Push [
Y
] or [
Z
] to select the memory channel.
w
Push [M/W] for 5 sec. to enter memory name writing mode.
• The first character of the name flashes.
e
Push [SCAN] or [SQL] as many times as necessary to
enter the desired name.
• To erase a character, overwritet with a space (displayed as _).
• To move the cursor forwards or backwards, use [
Y
] or [
Z
].
• Push [
] for 2 sec. to erase all characters.
r
Push [M/W] to input the set name.
• Flashing stops.
• Memory channels can be programmed with names of up to 5
characters in length.
• When no name is programmed, the display shows the operating
frequency.
• The following characters can be used in names:
➥
0 to 9, A to Z (capitals), (space), “-”, #, $, &, (, ), “,”, •, /,
<, >, =, “, ‘, ?, ! and @.
MR
MR
MR
[EXAMPLE]: Setting the name to “TOWER”.
SCAN
+
MW
MW
SQL
or
or
MR
for 5 sec.
for 2 sec.
IC-A4#01 IM 01.12.5 5:14 PM Page 10 (1,1)