14
3
MEMORY OPERATION
■
History memory channel
The transceiver has 10 history memory channels.
The standby frequency is stored into a history memory chan-
nel when pushing
[
↔
].
The frequency is stored into the history memory channel in
order from “CH01” to “CH10.”
q
Push
[RCL] to enter the memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w
Rotate
[O-DIAL] to select the history memory channel.
• “HISTORY” appears.
e
Rotate
[DIAL] to select a desired channel.
• Push
[
↔
] to exchange the history memory channel frequency
to the active frequency if necessary.
r
Push
[RCL] to exit the memory mode.
■
Clearing the memory contents
( Regular and group memory
channels only)
Unwanted memory channels can be cleared.
q
Push
[RCL] to select memory mode.
• The channel number appears.
• The memory channel name also appears if it has been entered.
w
Rotate
[O-DIAL] to select the memory channel type.
• Select from regular memory channel or group memory channel.
e
Rotate
[DIAL] to select a desired channel.
r
Push
[MEM], then rotate [O-DIAL] to select “DELETE.”
• The memory channel number blinks.
t
Push
[MEM] to delete the memory channel data.
• “-- -- -- -- -- --” appears momentarily, then the next selectable
channel appears.
y
Push
[RCL] to exit the memory mode.
CH01
127.00
5
122.00
RX
HISTORY
CH01
127.000
127.000
122.00
RX
MEMORY
ÅDELETE Ç
CH01
122.00
RX
MEMORY
NOTE:
Instead of steps
r
and
t
, holding down
[MEM]
for 2 seconds after step
e
also allows delete or revive op-
eration.
