![background image](http://html2.mh-extra.com/html/icom/ic-a110euro/ic-a110euro_instruction-manual_3531622008.webp)
5
2
BASIC OPERATION
■
Squelch function
The transceiver has a noise squelch circuit to mute undesired
noise while receiving no signal.
D
Setting the squelch level
q
Push [SQL] to turn the level adjusting mode ON.
w
Turn the tuning [DIAL] to select the squelch level.
•
‘SQ 01’ is loose squelch and ‘SQ 25’ is tight squelch. (Ini-
tial level is ‘SQ 01’)
•
‘SQ 01’ indicates that the squelch circuit is turned off.
• “
” appears on the display.
e
Push [SQL] to return to regular operation.
■
Side tone function
When using an optional headset, such as those from the
David Clark Co. via the OPC-871
HEAD SET ADAPTOR
,
the
transceiver outputs your transmitted voice to the headset for
monitoring. (p. 17)
■
LCD backlight control
The backlight of the can be set OFF, Low or High.
➥
Push [DIAL] to toggle the backlight control; OFF, Low or
High are available.
■
Dial select function
Use the dial select function to adjust the tuning behaviour of
the [DIAL] keys—use 1 MHz tuning when you want to change
the frequency in large increments; use regular tuning (25 kHz
or 8.33 kHz) when you want to change the frequency in
smaller increments.
q
Push [V/M] to select VFO
mode.
w
Push and hold [DIAL(TS)] for
1 sec. to select the desired
tuning increment.
•
1 MHz tuning or regular
tuning steps can be se-
lected. (see diagrams at
right)
e
Push and hold [DIAL(TS)] for
1 sec. to return to normal op-
eration.
NOTE:
Large tuning steps should be used only when you
want to change the frequency in large increments. Please
select regular tuning steps for normal operation.
1 MHz tuning selected
Regular tuning selected
IC-A110EURO-2 02.3.12 2:00 PM Page h (1,1)
Summary of Contents for IC-A110EURO
Page 1: ......
Page 23: ...10 OPTIONS...
Page 24: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan...