Icom IC-A110EURO, Instruction Manual

Page: 13 / 24

5
OTHER FUNCTIONS
10
■
Initial set mode
Initial set mode is accessed at power ON and allows you to
set seldom-changed settings. In this way you can “customize”
transceiver operations to suit your preferences and operating
style.
D
Entering initial set mode
q
While pushing and holding [V/M] + [TS(DIAL)], push
[POWER] sw to turn power ON.
• The transceiver enters initial set mode and “MN”, “BP”, “ST” or
“PR” (p. 11) appears on the display.
w
Push [TS(DIAL)] to select the
desired item as described
below and at right.
e
Turn [DIAL(TS)] to select the
desired condition.
r
Push [SCAN] to exit initial set
mode and select the previous
operating mode.
D
Memory names
This item allows you to display a memory name instead of fre-
quency.
• When a memory channel has not been programmed with
a name, frequency indication appears instead.
D
Beep tones ON/OFF
Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.
D
Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.
•
Optional
OPC-871 HEADSET
ADAPTER
is required
.
IC-A110EURO-2 02.3.12 2:00 PM Page m (1,1)