![background image](http://html2.mh-extra.com/html/icom/ic-a110euro/ic-a110euro_instruction-manual_3531622010.webp)
7
3
SCAN OPERATION
■
On–hook scan
On–hook scan (Hanger scan) is available when taking the mi-
crophone from its hanger (off–hook) and /or returning it into
the hanger (on–hook).
q
Push [SCAN] to start scanning.
w
When receiving a signal, scan pauses until the signal dis-
appears.
➥
You can converse by taking the microphone from the hook.
e
Place the microphone on the hook to restart scanning.
r
Scan restarts 2 sec. after the signal disappears even if you
did not converse the station.
When you take the microphone during the scan operation.
➥
In VFO scan; scan resumes promptly to frequency.
➥
In memory scan; scan resumes promptly to memory chan-
nel.
➥
In priority memory scan; scan resumes to priority channel,
NOTE:
Be sure to connect the supplied microphone
hanger to the vehicle’s ground for on/off hook microphone
functions. (p. 12)
■
Dualwatch
Dualwatch monitors priority channel while you are receiving
an other channel (VFO or memory channel).
• If a signal is received on
priority channel, dual-
watch pauses on priority
channel until the signal
disappears.
• To transmit on the se-
lected channel during du-
alwatch, push and hold
PTT.
ï
ï
Operation
q
Select the desired operating channel (VFO or Memory
channel).
w
Push and hold [PRI] for 1 sec. to start dualwatch.
‘P’ blinks during dualwatch.
e
To cancel dualwatch, push [PRI] again.
VFO
frequency
or
memory
channel
Priority
channel
5 sec.
250 msec.
IC-A110EURO-2 02.3.12 2:00 PM Page j (1,1)
Summary of Contents for IC-A110EURO
Page 1: ......
Page 23: ...10 OPTIONS...
Page 24: ...1 1 32 Kamiminami Hirano ku Osaka 547 0003 Japan...