![background image](http://html.mh-extra.com/html/icom/ic-80fx/ic-80fx_instruction-manual_612362036.webp)
31
8
SET MODES
D
Microphone gain
Sets the microphone gain to between 1 and 4 to suit your
needs. Higher values make the microphone more sensitive
to your voice.
NOTE:
When using the VOX function, we recommend
setting the microphone gain to 3. However, you can adjust
it to suit your operating environment (including your head-
set performance).
D
VOX delay
The VOX Delay is the amount of time the transmitter stays
ON after you stop speaking.
Sets the VOX Delay to between “VXd.05” (0.5 seconds),
“VXd.10” (1 second), “VXd.15” (1.5 seconds), “VXd.20” (2
seconds), “VXd.25” (2.5 seconds) and “VXd.30” (3 seconds).
D
VOX Time-out Timer
Sets the VOX Time-out Timer to 1, 2, 3, 4, 5, 10 or 15
minutes to prevent accidental prolonged transmission by the
VOX function.
To turn OFF the function, select “Vto.OF.”
The VOX Time-out Timer must be set shorter than the
Time-out Timer, otherwise this timer will not function.
D
DTMF TX key
Selects the method to transmit a DTMF code sequence.
While holding down
[PTT]
, push one of the keys,
[0]
to
[9]
,
[MONI]
(A),
[
S
]
(B),
[
T
]
(C),
[
]
(D),
[
M
]
(E), and
[# ENT]
(MN.W)
(F).
• dmt.k :
Transmits the appropriate DTMF code assigned to the
key.
• dmt.m :
Transmits the programmed DTMF code sequence in
the DTMF memory channel assigned to the key.