manualshive.com logo in svg

Icom ic-80fx, Instruction Manual

Share
Download
Icom ic-80fx Instruction Manual Download Page 44

39

OPTIONS

11

• BP-263

 

BATTERY

 

CASE

  Battery case for LR6 (AA) 

×

 6 alkaline batteries.

• BP-264

 

NI

-

MH

 

BATTERY

 

PACK

   7.2 V/1400 mAh (Typ.) Ni-MH battery pack. Battery life: 13 hrs. 

(approximately; high power, Tx : Rx : Standby = 5:5:90)

• BP-265

 

LI

-

ION

 

BATTERY

 

PACK

   7.4 V/1900 mAh (Min.)/2000 mAh (Typ.) Lithium Ion battery 

pack. Battery life: 18.5 hrs. (approximately.; high power, Tx : Rx 
: Standby = 5:5:90)

• BC-191

 

DESKTOP

 

CHARGER

+BC-123S

 

AC

 

ADAPTER

   For rapid charging of the Ni-MH battery pack. An AC adapter 

may be supplied with the charger, depending on the version.

  Charging time: approximately 2 hours for the BP-264.

• BC-192

 

DESKTOP

 

CHARGER

+BC-147S

 

AC

 

ADAPTER

   For regular charging of the Ni-MH battery pack. An AC adapter 

may be supplied with the charger, depending on the version.

  Charging time: approximately 16 hours for the BP-264.

• BC-193

 

DESKTOP

 

CHARGER

+BC-123S

 

AC

 

ADAPTER

   For rapid charging of the Li-Ion battery pack. An AC adapter 

may be supplied with the charger, depending on the version.

  Charging time: approximately 2.5 hours for the BP-265.

• CP-23L 

CIGARETTE

 

LIGHTER

 

CABLE

   For charging of the battery packs through a 12 V cigarette 

lighter socket. (For only BC-191/BC-193)

• OPC-515L

 

DC

 

POWER

 

CABLE

   For charging of the battery packs using a 12 V DC power 

source instead of the AC adapter. (For all chargers)

• MB-124

 

BELT

 

CLIP

  Exclusive alligator-type belt clip.

• 

FA-B71V 

245 MH

Z

 

ANTENNA

  The same antenna that is supplied with the transceiver.

• 

HM-153L 

EARPHONE

-

MICROPHONE

   Ideal for hands-free operation: clip the HM-153L (with inte-

grated PTT switch) to your lapel or breast pocket. 

• 

HM-158L/HM-159L 

SPEAKER

-

MICROPHONE

   Combination speaker-microphone that provides convenient 

operation while hanging the transceiver on your belt.

•

 HS-94/HS-95/HS-97

 

HEADSET

+OPC-2004

 

PLUG

 

ADAPTER

 

CABLE

  HS-94 

: Ear hook type

  HS-95 

: Neck & arm type

 HS-97 

: Throat microphone

 OPC-2004 :  

Allows you to connect the HS-94/HS-95/HS-97 to 
the transceiver. After connecting, the VOX function 
can be used.

•  CS-80FX 

CLONING

 

SOFTWARE

+OPC-478/OPC-478UC 

CLONING

 

CABLE

Provides quick and easy programming of channels and Set 
modes contents.

• 

OPC-474 

CLONING

 

CABLE

 

For transceiver-to-transceiver cloning.

Approved Icom optional equipment is designed for opti-
mal performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an 
Icom transceiver in the event Icom transceiver is used with 
equipment that is not manufactured or approved by Icom.

Summary of Contents for ic-80fx

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands