![background image](http://html2.mh-extra.com/html/icom/ic-756pro-iii/ic-756pro-iii_alignment-procedure_4134000008.webp)
RX Receiver
- Set radio to follows
- Frequency:
14.1015MHz
- Mode:
USB
- Shift:
0
- Filter
2.4KHz
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Receive
- Adjust L111, L112 and L113 for maximum level
RX Total Gain
- Set radio to follows
- Frequency:
14.1015MHz
- P AMP:
OFF
- Mode:
USB
- Shift:
0
- Filter
2.4KHz
- Connect RF signal generator to ANT connector
- Connect SINARDER to external SP Jack
- Apply 14.1015MHz/54dBu signals to ANT connector
- Apply no signals to ANT connector
- Adjust R210 for 30dB between with signals and without signals