![background image](http://html2.mh-extra.com/html/icom/ic-756pro-iii/ic-756pro-iii_alignment-procedure_4134000009.webp)
Noise Blanker
- Set radio to follows
- Frequency:
14.1015MHz
- P AMP:
OFF
- NB:
OFF
- Mode:
USB
- Shift:
0
- Filter
2.4KHz
- Set R271 to center
- Connect noise generator to ANT connector
- Connect oscilloscope to CP271
- Apply noise signals to ANT connector
- Adjust L272 for maximum level
- Turns noise blanker on
- Apply 20dBu noise signals to ANT connector
- Adjust R271 for removing noise signals