![background image](http://html1.mh-extra.com/html/icom/ic-7300-hf-plus/ic-7300-hf-plus_full-manual_4113602095.webp)
8
USING AN SD CARD
8-6
Loading the saved data files onto an SD card
You can load the Memory channels and transceiver’s
settings from the card to the transceiver.
This function is convenient when:
•
Copying the saved data to another IC-7300 to
operate with the same data.
•
Using one IC-7300 by two or more operators with
their own individual data.
L
The transceiver has “ALL” and “Select” loading
options to choose from.
TIP:
Saving the current data is recommended before
loading other data into the transceiver.
(Example: Loading the selected data)
1. Open the LOAD SETTING screen.
MENU
» SET > SD Card >
Load Setting
2.
Select the desired file to be loaded.
Rotate
Push
LOAD SETTING screen
3. Select “Select.”
4. Touch the desired loading option.
•“
✓
” is displayed left side of the selected option.
L
The Set mode settings and Memory channel contents
are always loaded.
5. Touch “<<Load>>.”
6. Touch [YES].
•
Starts the file check.
L
While checking the file, “Checking the file.” and a
progress bar are displayed.
L
When you select “REF Adjust” in step 4, “The new
"REF Adjust" setting will be saved” is displayed.
7.
After checking, the file loading starts.
•
While loading, “LOADING” and a progress bar are
displayed.
8.
After loading ends,
“Restart the IC-7300” is
displayed.
Turn the transceiver power OFF, then ON again to
restart the transceiver.
TIP:
When you select “ALL” in step 3, the following
contents are loaded.
•CI-V Address
•
Setting of the “REF Adjust” item in the Set mode.
• Set mode settings and Memory channel contents
Previous view