![background image](http://html1.mh-extra.com/html/icom/ic-7300-hf-plus/ic-7300-hf-plus_full-manual_4113602161.webp)
19
CONTROL COMMAND
19-7
Remote control (CI-V) information (Continued)
Cmd. Sub cmd.
Data
Description
1A* 05 0193 00/01
Send/read the MF band attenuator setting
(00=OFF, 01=ON)
0194
00 to 02
Send/read on-screen keyboard layout
(00=English, 01=German, 02=French)
0195
0000 to
0255
Send/read the Transmit voice level for the
VOICE TX function
(0000=0% to 0255=100%)
0196
p. 19-8
Send/read SSB-D TX bandwidth
0197
00/01
Inhibit Timer at USB connection
(00=OFF, 01=ON)
06
p. 19-9
Send/read DATA mode setting
07
00 to 01 Send/read IP+ function setting
(00=OFF, 01=ON)
1B* 00
p. 19-11
Send/read repeater tone frequency
01
p. 19-11
Set/read TSQL tone frequency
1C 00*
00
Send/read transceiver’s status RX
• When CI-V Output (for ANT) (Command:
1A 05 0157) is set to ON, automatically
outputs when changed.
01
Send/read transceiver’s status TX
• When CI-V Output (for ANT) (Command:
1A 05 0157) is set to ON, automatically
outputs when changed.
01*
00 to 02 00=Send/read the antenna tuner OFF
01=Send/read the antenna tuner ON
02=Send/read to tuning
02*
00/01
Send/read transmit frequency monitor setting
(00=OFF, 01=ON)
03
p. 19-8
Read transmit frequency
• When CI-V Output (for ANT) (Command:
1A 05 0157) is set to ON, automatically
outputs when changed.
04*
00/01
Send/read command to disable to output the
antenna controller status frequency and so on
from [REMOTE]
• Send/read command to enable to output the
antenna controller status frequency and so
on from [REMOTE].
1E 00
Read number of available TX frequency band
01
p. 19-8
Read TX band edge frequencies
02
Read number of user-set TX frequency band
03*
p. 19-8
Send/read user-set TX band edge frequencies
21* 00
p. 19-11
Send/read RIT frequency
01
00/01
Send/read RIT setting (00=OFF, 01=ON)
02
00/01
Send/read
∂
TX setting (00=OFF, 01=ON)
25*
p. 19-11
Send/read the selected or unselected VFO
frequency
26*
p. 19-11
Send/read the selected or unselected VFO’s
operating mode and filter
27* 00
p. 19-12 Read the Scope waveform data
• Only when “Scope ON/OFF status”
(Command: 27 10) and “Scope data output”
(Command: 27 20) are set to “ON,” outputs
the waveform data to the controller.
10
00/01
Send/read the Scope ON/OFF status
(00=OFF, 01=ON)
11
00/01
Send/read the Scope wave data output*4
(00=OFF, 01=ON)
12
00
Send/read the Main or Sub scope setting
(00=Main only)
13
00
Send/read the Single/Dual scope setting
(00=Single only)
14
p. 19-12 Send/read the Scope Center mode or Fixed
mode setting
15
p. 19-12 Send/read the span setting in the Center
mode Scope
16
p. 19-12 Send/read the Edge number setting in the
Fixed mode Scope
17
p. 19-12 Send/read the Scope hold function ON or OFF
19
p. 19-12 Send/read the Scope Reference level setting
1A
p. 19-13 Send/read the Sweep speed setting
1B
00/01
Send/read the Scope indication during TX in
the Center mode (00=OFF, 01=ON)
D
Command table (Continued)
* (Asterisk) Send/read data
*1 To insert a counter, first clear the other channel’s counter.
*2 In the CW mode, if the [TRANSMIT] or an external TX
switch is ON, or the Break-in function is ON, a message
will be transmitted as CW code when you send it from
your PC.
*3 When sending the power ON command (18 01), you need
to repeatedly send “FE” before the standard format. The
following is the approximated quantity of the repetition.
•115200 bps: 150 “FE”s
•57600 bps: 75 “FE”s
•38400 bps: 50 “FE”s
•19200 bps: 25 “FE”s
•9600 bps:
13 “FE”s
•4800 bps:
7 “FE”s
Example: When using 4800 bps
F
F
E
x7
4
9
E
F
E
E
1
0
8
1
O
D
F
*4 You can only set this item when “Unlink from [REMOTE]”
is selected on the “CI-V USB port” screen, and then
“115200” is selected on the “CI-V Baud Rate” screen.
Cmd. Sub cmd.
Data
Description
27* 1C
00 to 02 Send/read scope center frequency setting in
the Center mode
( 00=Filter center, 01=Carrier point center,
02=Carrier point center (Abs. Freq.)
1D
p. 19-13 Send/read the Scope VBW setting
1E
p. 19-13 Send/read the Scope Fixed edge frequencies
28* 00
00 to 08 Transmits the Voice TX memory content
(00=T1 to 08=T8, 0x00=Cancel TX)
Previous view