![background image](http://html1.mh-extra.com/html/icom/ic-7300-hf-plus/ic-7300-hf-plus_full-manual_4113602158.webp)
19
CONTROL COMMAND
19-4
Remote control (CI-V) information (Continued)
Cmd. Sub cmd.
Data
Description
16* 4F
00 to 01 Twin Peak Filter *(00=OFF, 01=ON)
Can be turned ON only when Mark and Shift
are set to 2125 Hz and 170 Hz, respectively.
50
00 to 01 Dial lock function *(00=OFF, 01=ON)
56
00 to 01
DSP filter type *(00=SHARP, 01=SOFT)
57
00 to 02 Manual notch width
(00=WIDE, 01=MID, 02=NAR)
58
00 to 02 SSB transmit bandwidth
(00=WIDE, 01=MID, 02=NAR)
65
00/01
Send the IP+ function setting
(00=OFF, 01=ON)
17
p. 19-11
Send CW messages*
2
18 00
Turn OFF the transceiver
01
Turn ON the transceiver*
3
19 00
Read the transceiver ID
1A* 00
p. 19-10 Send/read memory contents
01
p. 19-9
Send/read band stacking register contents
02
p. 19-10 Send/read memory keyer contents*
1
03
00 to 49
Send/read the selected filter width
( AM: 00=200 Hz to 49=10 kHz; other than AM
modes: 00=50 Hz to 31/40=2700 Hz/3600
Hz)
04
00 to 13 Send/read the selected AGC time constant
*( 00=OFF, AM: 01=0.3 sec. to 13=8.0 sec.,
SSB,CW,RTTY:01=0.1 sec. to 13=6.0 sec.)
05 0001 p. 19-8
Send/read SSB RX HPF/LPF settings
0002 00 to 10 Send/read SSB RX Tone (Bass) level
(00=–5 to 10=+5)
0003 00 to 10 Send/read SSB RX Tone (Treble) level
(00=–5 to 10=+5)
0004 p. 19-8
Send/read AM RX HPF/LPF settings
0005 00 to 10 Send/read AM RX Tone (Bass) level
(00=–5 to 10=+5)
0006 00 to 10 Send/read AM RX Tone (Treble) level
(00=–5 to 10=+5)
0007 p. 19-8
Send/read FM RX HPF/LPF settings
0008 00 to 10 Send/read FM RX Tone (Bass) level
(00=–5 to 10=+5)
0009 00 to 10 Send/read FM RX Tone (Treble) level
(00=–5 to 10=+5)
0010 p. 19-8
Send/read CW RX HPF/LPF settings
0011
p. 19-8
Send/read RTTY RX HPF/LPF settings
0012 00 to 10 Send/read SSB TX Tone (Bass) level
(00=–5 to 10=+5)
0013 00 to 10 Send/read SSB TX Tone (Treble) level
(00=–5 to 10=+5)
0014 p. 19-8
Send/read SSB TX bandwidth for wide
0015 p. 19-8
Send/read SSB TX bandwidth for mid
0016 p. 19-8
Send/read SSB TX bandwidth for narrow
0017 00 to 10 Send/read AM TX Tone (Bass) level
(00=–5 to 10=+5)
0018 00 to 10 Send/read AM TX Tone (Treble) level
(00=–5 to 10=+5)
0019 00 to 10 Send/read FM TX Tone (Bass) level
(00=–5 to 10=+5)
0020 00 to 10 Send/read FM TX Tone (Treble) level
(00=–5 to 10=+5)
0021 0000 to
0255
Send/read beep gain
(0000=min. to 0255=max.)
0022 00/01
Send/read beep gain limit *(00=OFF, 01=ON)
0023 00/01
Send/read confirmation beep
(00=OFF, 01=ON)
0024 00
Send/read the band edge beep OFF
01
Send/read the band edge beep ON
(Beep sounds with a default amateur band)
02
Send/read the band edge beep with user
setting ON
03
Send/read the band edge beep with user
setting/TX limit ON
0025 00 to 02 Send/read the RF/SQL Control setting
(00=Auto, 01=SQL, 02=RF+SQL)
Cmd. Sub cmd.
Data
Description
1A* 05 0026 00 to 05 Send/read the TX Delay setting (HF)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0027 00 to 05 Send/read the TX Delay setting (50 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0028 00 to 05 Send/read the TX Delay setting (70 MHz)
( 00=OFF, 01=10 ms, 02=15 ms, 03=20 ms,
04=25 ms, 05=30 ms)
0029 00 to 05 Send/read the Time-Out Timer setting
( 00=OFF, 01=3 min., 02=5 min., 03=10min.,
04=20 min., 05=30 min.)
0030 00/01
Send/read quick split set *(00=OFF, 01=ON)
0031 p. 19-9
Send/read FM split offset –9.999 to +9.999
MHz for HF
0032 p. 19-9
Send/read FM split offset –9.999 to +9.999
MHz for 50 MHz
0033 00/01
Send/read split lock set *(00=OFF, 01=ON)
0034 00/01
Send/read [TUNER] Switch set
(00=Manual, 01=Auto)
0035 00 or 01 Send/read PTT tune set *(00=OFF, 01=ON)
0036 00 to 02 Send/read RTTY mark frequency
(00=1275 Hz, 01=1615 Hz, 02=2125 Hz)
0037 00 to 02 Send/read RTTY shift width
(00=170 Hz, 01=200 Hz, 02=425 Hz)
0038 00/01
Send/read RTTY keying polarity
(00=Normal, 01=Reverse)
0039 00/01
Send/read speech language
(00=English, 01=Japanese)
0040 00/01
Send/read speech speed (00=Low, 01=High)
0041 00/01
Send/read S-level speech (00=OFF, 01=ON)
0042 00/01
Send/read speech with a mode switch
operation (00=OFF, 01=ON)
0043 0000 to
0255
Send/read speech level
(0000=0% to 0255=100%)
0044 00/01
Send/read [SPEECH/LOCK] key function
setting
( 00=Push: SPEECH, Hold down: LOCK,
01=Push: LOCK, Hold down: SPEECH)
0045 00/01
Send/read the Lock function setting
(00=MAIN DIAL, 01=PANEL)
0046 00/01
Send/read memo pad numbers
(00=5 ch, 01=10 ch)
0047 00 to 02 Send/read main dial auto TS
(00=OFF, 01=Low, 02=High)
0048 00/01
Send/read mic. up/down speed
(00=Low, 01=High)
0049 00 or 01 Send/read quick RIT/
∂
TX clear function
(00=OFF, 01=ON)
0050 00 to 02 Send/read SSB notch operation
*(00=Auto, 01=Manual, 02=Auto/Manual)
0051 00 to 02 Send/read AM notch operation
(00=Auto, 01=Manual, 02=Auto/Manual)
0052 00/01
Send/read SSB/CW synchronous tuning
function (00=OFF, 01=ON)
0053 00/01
Send/read CW normal side set
(00=LSB, 01=USB)
0054 00/01
Send/read screen capture by the [POWER]
switch (00=OFF, 01=ON)
0055 00/01
Send/read screen capture image data saving
format (00=PNG format, 01=BMP format)
0056 00/01
Send/read keyboard type
(00=Ten-key, 01=Full Keyboard)
0057 00/01
Send/read calibration marker
(00=OFF, 01=ON)
0058 0000 to
0255
Send/read reference frequency
(0000=0%,0255=100%)
0059 00 or 01 Send/read AF/IF signal output to ACC/USB
(00=AF, 01=IF)
0060 0000 to
0255
Send/read AF output level to ACC/USB
(0000=0% to 0255=100%)
D
Command table (Continued)
Previous view