![background image](http://html1.mh-extra.com/html/icom/ic-7300-hf-plus/ic-7300-hf-plus_full-manual_4113602051.webp)
4
RECEIVING AND TRANSMITTING
4-17
Operating CW (Continued)
EDIT
D
Electronic Keyer function
You can set the Memory Keyer function settings,
paddle polarity settings, and so on of the Electronic
Keyer.
1. Open the KEYER screen in the CW mode.
MENU
»
KEYER
L
You can select [KEYER] on the MENU screen only in
the CW mode.
2. Touch [EDIT/SET].
•Opens the EDIT/SET screen.
KEYER screen
3. Select the desired item to set.
Keyer memory edit menu (p. 4-19)
You can edit the Keyer memories.
001 SET
CW-KEY SET
EXIT
Contest number menu (p. 4-20)
You can set the number style, count
up trigger, and present number.
Key set menu (p. 4-21)
You can set the memory keyer
repeat time, dot/dash ratio, paddle
polarity, key type, and so on.
D
Monitoring the CW side tone
When the transceiver is in standby and the Break-In
function is OFF, you can listen to the CW side tone
without actually transmitting.
Information
L
• This enables you to match your transmit frequency
exactly to another station’s by matching the audio tone.
• You can also use the CW side tone (make sure the
Break-in function is OFF (p. 4-15)) to practice CW
sending.
• You can adjust the CW side tone level in “Side Tone
Level.”
MENU
» KEYER > EDIT/SET > CW-KEY SET >
Side Tone Level
EDIT/SET screen
Rotate
Push
4. To close the KEYER screen, push
EXIT
several
times.
Previous view