![background image](http://html2.mh-extra.com/html/icom/ic-718/ic-718_instruction-manual_3522259038.webp)
6
MEMORY OPERATION
36
Memory channel programming can be performed ei-
ther in VFO mode or in memory mode.
■
Memory channel programming
D
Programming in memory mode
q
Select the desired memory channel with [UP
Y
] or
[
Z
DN] in memory mode.
• “BLANK” appears if the selected memory channel is a
blank channel (and does not have contents).
w
Set the desired frequency and operating mode in
memory mode.
• To program a blank channel, use direct frequency entry
with the keypad in advance.
e
Push [MW] for 1 sec. to program the displayed fre-
quency and operating mode into the memory
channel.
• Preamp setting, attenuator on/off,and AGC setting can
also be programmed into a memory channel.
[EXAMPLE]: Programming 21.280 MHz/CW into
memory channel 18.
D
Programming in VFO mode
q
Set the desired frequency and operating mode in
VFO mode.
w
Push [CH], then push [UP
Y
] or [
Z
DN] several
times to select the desired memory channel.
• “MEMO” blinks.
• “BLANK” appears if the selected memory channel is a
blank channel.
e
Push [MW] for 1 sec. to program the displayed fre-
quency and operating mode into the memory
channel.
r
Push [CH] to exit memory channel select mode.
[EXAMPLE]: Programming 7.086 MHz/LSB into
memory channel 10.
CH
or keypad
Push for 1 sec.
Beep
Beep
Beep
MW
4
MODE
or
DN
√
UP
∫
CH
CH
ENT
F-INP
V/M
1
[2], [1], [.], [2], [8]
Push for 1 sec.
Beep
Beep
Beep
MW
4
or
DN
√
UP
∫
CH
then
ENT
F-INP