![background image](http://html2.mh-extra.com/html/icom/ic-718/ic-718_instruction-manual_3522259007.webp)
■
Function display
q
LOCK INDICATOR (p. 19)
Appears when the dial lock function is in use.
w
RECEIVE INDICATOR
Appears while receiving a signal or when the
squelch is open.
e
TUNE INDICATOR
Appears while the automatic tuning function is acti-
vated.
r
TRANSMIT INDICATOR
Appears while transmitting.
t
FUNCTION INDICATORS
➥
“P.AMP” appears when antenna preamp is in use.
➥
“ATT” appears when the attenuator function is in
use.
➥
“NB” appears when the Noise Blanker function is
turned ON.
➥
“BK” appears when the semi break-in function is
selected in quick set mode.
➥
“F-BK” appears when the full break-in function
activates in CW mode. (p. 31)
➥
“VOX” appears when the VOX function is selected
in quick set mode.
➥
“COM” appears when the speech compressor ac-
tivates in SSB mode.
➥
“SCAN” appears when the scan function is acti-
vated.
• Flashes when scan is paused.
y
DSP UNIT INDICATOR (p. 49)
Appears when an optional UT-106
DSP UNIT
is in-
stalled.
u
AUTOMATIC NOTCH FILTER INDICATOR (p. 23)
Appears when the optional Automatic Notch Filter
function is in use.
i
NOISE REDUCTION INDICATOR (p. 23)
Appears when the optional Noise Reduction func-
tion is in use.
o
SIGNAL/SQL/RF-GAIN METER
➥
Functions as an S-meter while receiving.
➥
Functions as a Power, ALC or SWR meter while
transmitting. (p. 26)
!0
VFO/MEMORY INDICATOR (p. 16)
“VFO A” or “B” appears when VFO mode is se-
lected.
“MEMO” appears when memory mode is selected.
!1
MEMORY CHANNEL NUMBER READOUT (p. 35)
Shows the selected memory channel number.
!2
BLANK INDICATOR (p. 38)
Shows that the displayed memory channel is not
programmed.
• This indicator appears both in VFO and memory mode.
!3
SPLIT INDICATORS (p. 30)
Appears when the split frequency operation is in
use.
!4
RIT INDICATOR (p. 21)
Appears when the RIT function is in use.
!5
FREQUENCY READOUT
Shows the operating frequency.
!6
REVERSE INDICATOR (p.19)
Appears when the CW reverse or RTTY reverse
mode is selected.
!7
WIDE/NARROW FILTER INDICATORS (pgs. 24, 25)
➥
“
” appears when the wide IF filter is selected.
➥
“
” appears when the narrow IF filter is se-
lected.
!8
PROGRAMMABLE TUNING STEP INDICATORS
Appears when the programmable tuning step is se-
lected.
!9
MODE INDICATORS (p. 20)
Indicates the selected operating mode.
5
2
PANEL DESCRIPTION
!9
!6
!7
!8
o
!1
!0
r
e
w
!4
!2
!5
!3
t
q
y
u
i