Icom IC-700, Quick Reference

Page: 4 / 15

1
PANEL DESCRIPTION
1-20
u
MODE KEY [MODE]
Push to cycle through the operating modes:
➥
USB/LSB
➧
CW/CW-R
➧
RTTY/RTTY-R
➧
AM
➧
FM
➧
WFM
➧
DV
Hold down for 1 second to toggle the following
➥
operating modes:
USB
↔
LSB
CW
↔
CW-R
RTTY
↔
RTTY-R
i
POWER LED
Lights green when transceiver’s power is ON.
o
PROGRAMMABLE FUNCTION KEYS [F-1]/[F-2]
Program and perform a selected function.
• The functions can be assigned in the “RC MIC” item of
the “Function” Set mode (p. 6-6). The default settings for
[F-1] and [F-2] are “MPW” and “MPR.”
SET > Function >
RC MIC
!0
MEMORY WRITE KEY [MW] (AI sec. 11)
Hold down for 1 second to store VFO data into the
selected memory channel.
• This can be done in both the VFO and memory modes.
!1
VFO/MEMORY SELECTION KEY [V/M]
Push to switch between the VFO and memory
➥
modes. (p. 3-4)
Hold down for 1 second to copy the memory con-
➥
tents to the displayed VFO. (AI sec. 11)
!2
TRANSMIT FREQUENCY CHECK KEY [XFC]
➥
During split frequency or repeater operation, hold
down to listen to the transmit frequency. (AI sec. 4)
• While holding down this switch, the transmit frequen -
cy can be changed with the Dial or
MPAD
.
• When the Split Lock function is turned ON in the Split
operation, hold down [XFC] to cancel the Dial lock
function. (AI sec. 6)
➥
When operating simplex, hold down to monitor
the frequency.
• While holding down this key, the squelch is open and
the interference reject function is temporarily turned
OFF.
➥
When operating simplex and the RIT function is
turned ON, hold down to listen to the transmit fre-
quency. The frequency is the same as when the
RIT is OFF. (AI sec. 5)
➥
In the DV mode, hold down this key to select the
RX monitoring mode. (p. 6-3)
!3
TUNER/CALL KEY [TUNER/CALL]
❍
ANTENNA TUNER KEY Operation (AI sec. 16)
(Frequency band: HF, 50/70* MHz)
➥
Push to turn an optional antenna tuner ON or
OFF (bypass).
➥
Hold down for 1 second to manually start the
antenna tuner.
• If the tuner cannot tune the antenna within 20 sec -
onds, the tuning circuit is automatically bypassed.
* 70 MHz band transmission is available, depending on
the transceiver version.
❍
CALL KEY Operation (AI sec. 11)
(Frequency band: 144/430 MHz)
Push to select the Call channel.
HM-151 (Option) (Continued) D
Microphone
SPCH
/LOCK
TUNER
/CALL
XFC
V/M
F-1
F-2
FIL
MODE
GENE
MW
1 2 3
4 5 6
7 8 9
.
0
CE
F-INP
ENT
1.8 3.5 7
10 14 18
21 24 28
50 144 430
o
!0
!2
!1
!3
Mic element
i
u