33
9
OTHER FUNCTIONS
9
■
RX frequency
(for RX only channels)
The RX channel frequency can be set to between 450 and
520 MHz.
D
RX channel setting
The RX channels are set to “Disable,” and they are not
displayed on the screen as the default setting. The RX
channels need be set to “Enable” in order to set the RX
frequency.
While holding down
q
and
, hold down
to turn
ON the transceiver power.
• The RX channel list screen is displayed as shown below.
w
Push [
] or [
] to select the desired RX channel, and
then select “Enable.”
Hold down
e
to turn OFF the transceiver power, and
then turn ON again for the operating mode.
D
RX frequency setting
Push
q
[
] or [
] to select the desired RX channel.
Push
w
to enter the menu mode.
Push [
e
] or [
] to select “RX VFO” to enter the RX
frequency editing mode.
Push
r
[
] or [
] to select the digit to edit, and then push
[
] or [
] to change the selected digit.
• You can enter between 450 and 520 MHz. (12.5 kHz steps)
Repeat step
t
r
to enter the desired frequency.
Push
y
[
] to set the RX frequency.
• Two beeps sound.
Push
u
several times to return to the operating mode.
Summary of Contents for IC-450
