![background image](http://html.mh-extra.com/html/icom/ic-450/ic-450_instruction-manual_612154029.webp)
23
6
SCAN
6
D
Scan resume mode
Push
q
to enter the menu mode.
Push [
w
] or [
] to select “Scan Resume.”
(“Settings” > “Scan Resume”)
Push [
e
] or [
] to select the desired scan resume mode,
and then push [
] to set.
• 5sec:
Scan pauses for 5 seconds, and then resumes.
• 10sec:
Scan pauses for 10 seconds, and then resumes.
• 15sec:
Scan pauses for 15 seconds, and then resumes.
• 5sec No Signal: Scan pauses until the signal disappears, and
then resumes 5 seconds after the signal has
disappeared.
5sec No Signal is recommended for normal use, and is set as
the default.
r
Push
to exit the menu mode.
■
Open scan
An Open scan automatically searches for transmitted
signals and enables you to locate new stations for
communication or listening.
IMPORTANT!
An Open scan can transmit on a start channel or busy channel.
Select “Open Scan” in the “Scan Mode” menu. (p. 22)
q
• “
” appears on the operating screen.
Push
w
to start the Open scan.
Scan start channel
Blinks
e
When receiving a signal, the scan pauses and resumes,
according to the selected Scan resume mode (see to the
left.)
r
Push
to cancel the scan.
Open scan is selected.
Appears
Summary of Contents for IC-450
