![background image](http://html.mh-extra.com/html/icom/ic-450/ic-450_instruction-manual_612154017.webp)
11
3
BASIC OPERATION
3
D
Zone selection
(Selectable only when more than two zones are set.)
Push
q
to enter the menu mode.
Push [
w
] or [
] to select “Zone,” and then push [
] to
enter the zone selecting screen.
Push [
e
] or [
] to select the desired zone, and then
push [
] to set.
Push
r
to exit the menu mode.
NOTE:
• ‘CB 05,’ ‘RPT05’ and ‘CB 35’ channels are used for
emergency.
• No voice transmissions are permitted on ‘CB 22’ and
‘CB 23’ (voice operation is inhibited on these channels.)
■
Receiving and transmitting
Receiving:
Hold down
q
for 2 seconds to turn ON the power.
• If “TSQL” is displayed on the screen, push
to enter the
setting menu, and then select “Tone SQL” to enter the tone
squelch menu and select “Off” to cancel the tone squelch or
pocket beep. (pp. 26, 27)
Push
to exit the menu mode.
Push
w
[
] or [
] to select the desired operating channel
(p. 10).
• When receiving a signal, the TX/RX indicator lights green,
and audio is heard from the speaker.
• Further adjustment of volume level may be necessary at this
point. (p. 10)
• Hold down
for 2 seconds to turn the Monitor function ON
or OFF.
Summary of Contents for IC-450
