![background image](http://html.mh-extra.com/html/icom/ic-440/ic-440_instruction-manual_612149016.webp)
12
2
PANEL DESCRIPTION
■
Programmable function keys
The following functions can be assigned to
F
SET
,
MONI
T SQL
,
SCAN
TAG
,
PRIO
SET
P
,
O
G
P
RS
,
CH
SQL
and
LOW
programmable function keys with the
optional CS-440
CLONING
SOFTWARE
.
The key function activates after pushing
F
SET
when the pro-
grammable function key is assigned to the function mode
operation.
If the programmable function names are bracketed in the fol-
lowing explanations, the specifi c key is used to activate the
function depends on the programming.
Scan/Scan Tag
➥
Push to start/stop the scan.
➥
Push and hold for 2 sec. to set or clear the displayed
channel as a TAG channel.
Scan Mode/Rpt Scan
➥
Push to select the scan mode.
➥
Push and hold for 2 sec. to start repeater scan.
PRIO/PRIO Set
➥
Push to select the priority channel.
➥
Push and hold for 2 sec. to set the displayed channel as
the priority channel.
S-Ring/PRIO Clear
➥
Push to transmit the Smart-Ring call.
• When RX channel is selected, “
N/A
” appears.
➥
Push and hold for 2 sec. to cancel the priority channel set-
ting.
Monitor/TSQL
(This key function can be assigned in the Normal mode only.)
➥
Push to toggle the monitor function ON or OFF.
➥
Push and hold for 2 sec. to activate the following functions
in order.
•
Subaudible tone encoder and Tone squelch/DTCS squelch
• Pocket beep
• No tone operation.
RF Power/Lock
➥
Push to toggle the transmit output power level.
➥
Push and hold for 2 sec. to toggle key lock function ON
and OFF.
TX Code CH/Call
➥
Push to enter the TX code channel selection mode, then
push
or
to select the desired channel (CB chan-
nel operation only).
➥
Push and hold for 2 sec. to transmit the specifi ed SelCall
TX code on the selected channel (CB channel operation
only).
IC-440-1.indd 12
IC-440-1.indd 12
2008/06/25 15:59:32
2008/06/25 15:59:32