![background image](http://html.mh-extra.com/html/icom/ic-440/ic-440_instruction-manual_612149017.webp)
2
PANEL DESCRIPTION
2
Quiet/ID-MR
➥
Push to select function ON or OFF (CB channel operation
only).
➥
Push and hold for 2 sec. to enter the received ID code his-
tory indication mode.
SQL/ATS
➥
Push to enter the squelch level setting mode, then push
or
to set the squelch level.
➥
Push and hold for 2 sec. to turn the ATS (Automatic Tran-
sponder System) function ON and OFF.
Dup/Zone
➥
Push to set the selected channel as Duplex or Simplex
operation (Depending on pre-setting).
•
Duplex channel can be selected in ‘CB-R1’ to ‘CB-R8’ only.
➥
Push and hold this key for 2 sec. then push
or
to
select the desired zone. (Available only when more than
two zones are set.)
Function/Set Mode
(This key function can be assigned to the
F
SET
key only.)
➥
Push to turn Function mode ON or OFF.
➥
Push and hold for 2 sec. to the Set mode ON or OFF.
•
After entering the Set mode, push this key momentarily to select
the item, and push
or
to change the setting.
Function/RX VFO
(This key function can be assigned to the
F
SET
key only.)
➥
Push to turn Function mode ON or OFF.
➥
Push and hold for 2 sec. to enter the RX VFO mode.
In RX VFO mode, the operating frequency and the chan-
nel spacing setting can be changed.
SQL/Set Mode
(This key function can be assigned to the
F
SET
key only.)
➥
Push to enter the squelch level setting mode, then push
or
to set the squelch level.
➥
Push and hold for 2 sec. to the Set mode ON or OFF.
•
After entering the Set mode, push this key momentarily to select
the item, and push
or
to change the setting.
13
IC-440-1.indd 13
IC-440-1.indd 13
2008/06/25 15:59:33
2008/06/25 15:59:33