![background image](http://html1.mh-extra.com/html/icom/i7200/i7200_instruction-manual_611946064.webp)
59
6
FUNCTIONS FOR TRANSMIT
D
Quick split function
When you find a DX station, an important considera-
tion is how to set the split frequency.
When you push and hold
SPLIT
for 1 sec., the split
function is activated, and the undisplayed VFO is set
the same as the displayed VFO.
This shortens the time needed to start split fre-
quency operation.
Quick split operation is turned ON by default but can
be turned OFF in the set mode (p. 76).
The following is an example of setting 7.0620 MHz
for receiving and 7.0750 MHz for transmitting.
q
Select VFO A.
• Pushing
A/B=
toggles VFO A and VFO B.
w
Set the frequency to 7.0620 MHz and mode to
LSB. (pgs. 25, 29)
e
Push and hold
SPLIT
for 1 sec. to turn the split
function ON and equalize the undisplayed VFO B
frequency and operating mode with the displayed
VFO A.
• “
” appears on the LCD.
r
Set the XFC (transmit frequency check) function
ON in the set mode. (pgs. 58, 76)
• The default setting is OFF.
t
While pushing and holding
RIT
, rotate
[DIAL]
to
set the transmit frequency to 7.0750 MHz.
y
Now you can receive on 7.0620 MHz and transmit
on 7.0750 MHz.
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
[DIAL]
[M-CH]
A/B
2
=
3.5
SPLIT
3
7
Appears
D
Split lock function
Accidentally releasing
RIT
while rotating
[DIAL]
changes the receive frequency. To prevent this, use
both the split lock and dial lock functions to change
the transmit frequency only. The split lock func-
tion cancels the dial lock function while pushing and
holding
RIT
during split frequency operation.
The dial lock’s effectiveness during split frequency
operation can be selected in the set mode for both
receive and transmit frequencies; or only the receive
frequency. (p. 76)
When the split lock function is ON, the transmit fre-
quency cannot be adjusted by rotating
[DIAL]
while
transmitting even if the lock function is not activated.
q
Set the split lock function ON in the set mode.
q
Push and hold
M-CH/RIT
SET
for 1 sec. twice to enter
the set mode.
w
Rotate
[M-CH]
to select “
SPLIT LK
.”
e
Rotate
[DIAL]
to select ON.
r
Push
M-CH/RIT
SET
to exit the set mode and return to
normal operation.
w
During split operation, push and hold
SPCH
for
1 sec. to turn the dial lock function ON.
• “
” appears on the LCD.
e
While pushing and holding
RIT
*, the transmit
frequency and mode are indicated. And Rotate
[DIAL]
to set the transmit frequency.
*XFC function is should be turned ON in advance. (p. 76)