![background image](http://html1.mh-extra.com/html/icom/i7200/i7200_instruction-manual_611946028.webp)
23
3
BASIC OPERATION
■
Selecting VFO/memory mode
➥
Push
V/M
➔
to toggle between VFO and memory
modes.
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
D
Differences between VFO mode and memory mode
VFO MODE
Each VFO shows a frequency and operating mode.
If the frequency or operating mode is changed, the
VFO automatically memorizes the new frequency or
operating mode.
When the VFO is selected from another VFO or
memory mode, the last used frequency and operat-
ing mode for that VFO appears.
[EXAMPLE]
Changed frequency (14.123 MHz) does not appear and
memorized frequency (14.100 MHz) appears instead.
Memory channel 1
is selected.
The frequency is
changed.
Memory channel 1
is selected again.
Another memory
channel is selected.
VFO is selected.
The frequency is
changed.
VFO is selected
again.
Changed frequency (14.123 MHz) appears.
Memory mode is
selected.
MEMORY MODE
(pgs. 61–64)
Each memory channel shows a frequency and op-
erating mode like a VFO. Even if the frequency or
mode is changed, the memory channel does not
memorize the new frequency or operating mode.
When the memory channel is selected from another
memory channel or VFO mode, the memorized
frequency and operating mode appear even if the
memory channel settings, frequency and mode, are
changed before selecting another memory channel
or VFO mode.
[EXAMPLE]