12
3
DRIVER INSTALLATION
2001 NEW
2001 NEW
■
Microsoft
®
Windows
®
2000
q
Connect the ID-RP1D/VS [SERVICE ] connector
and the PC USB port through an USB cable and
connector converter.
• Turn the power ON.
• “Found New Hardware” dialog box appears below.
w
The “Found New Hardware Wizard” will come up as
below. Click [Next>].
e
Select “Search for a suitable driver for my device
(recommended)”, then click [Next>].
r
Select “CD-ROM drives”, and insert the supplied
CD into the CD drive, then click [Next>].
t
When the driver is found, the following dialog is dis-
played. Click [Next>] to start the installation.
NOTE:
When the appropriate driver is not found, a
different dialog is displayed. In such case, click
[<Back], select “Specify a location”, click [Next>],
then type “D:\driver” in the text box to select the “Dri-
ver” folder in the CD (if CD drive is D).
y
After the installation is completed, click [Finish].
u
The “Found New Hardware” wizard appears again.
i
Click [Next>].
Click
Click
Click
Click
Select
Click
Select
Click
ID-RP1.qxd 02.12.17 11:43 Page 12
