Fan Test
1 . Press
FAN
(right) button . Fan displays . Indoor fan turns ON .
2 . Press
FAN
(right) button . Indoor fan turns OFF .
OFF
Cool Test
1 . Press
SYS
(left) button until cool mode is displayed .
2 . Adjust set temperature so it is 5 degrees below room temperature .
3 . A/C should come on within a few seconds . Green LED may turn ON .
4 . Adjust the set temperature 2 degrees above the room temperature and the
A/C should turn off . There may be a fan delay on your system .
Note:
There is a four-minute time delay to protect the compressor after it
turns off . To bypass the compressor time delay, go to OFF mode for 5 seconds .
Lockout Feature
The SC4811 has a button lockout feature so the mode cannot be changed
and the temperature adjustment is limited . Select the appropriate lockout
from Configuration Mode Settings (Step 8, Page 12) of this guide .
To activate the LOCK feature:
1 . Simultaneously press the
SYS
,
FAN
and
UP
buttons for 10 seconds .
2 . will display and the lockout function will be enabled .
To deactivate the LOCK feature, repeat steps 1 and 2 above .
