Using the Front Wheels
1.
To assemble,
ensure
that the wheel lock
mechanism is located
at the top of the wheel,
then
insert
each wheel
,
lock lever first,
into the
front of
the pram until
you
hear a ‘click’
2.
To lock the front
wheels into a fixed
position, raise each
of the
lock
levers
found
on the front
of the wheels.
3.
To unlock the
wheels and allow
for better manoeu-
vrability, lower each
of the
lock
levers
WARNING: THE WHEELS MUST ALWAYS BE BOTH FIXED OR BOTH
SWIVEL FOR CORRECT USE OF THIS STROLLER
Using the Safety Harness
1.
Connect each
side strap to the
crotch strap
located in the
centre of the seat
2.
To disconnect
the harness, press
the button in the
centre of the crotch
strap
3.
To unfasten the
shoulder straps,
release the spring
clips connected to
the side straps
WARNING: ALWAYS USE STROLLER WITH THE CHILD STRAPPED WITH THE SAFETY
HARNESS! USE THE SAFETY HARNESS TOGETHER WITH THE CROTCH STRAP
06
07
Using the Br
a
k
e
s
1.
To engage the br
ake
, press down on
either of the clips located over the back
wheels. Push past the second click to
fully
engage the locking system and test
to
ensure the brakes are fully engaged
2.
To release the br
a
k
e
, lift either
of
the clips upwards
1.
With the footbreak engaged,
attach the bumper bar to the
corresponding slots in the front
of
the stroller
2.
Remove the bumper bar by
pressing the button lock under-
neath and pulling it outwards
WARNING: THE BRAKES MUST BE ENGAGED EACH TIME YOUR STOP
WITH
YOUR CHILD IN THE STROLLER
Inserting and Removing the Bumper Bar
NOTE: The Discovery bumper bar has 4 sections to allow it to bend, and
for gate opening function
v.02.20
v.02.20
