NI-707534
Wireless Router 300N
- 69 -
5. Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.11.3 Target
Choose menu “
Access Control
→
Target
”, you can view and set a Target list in the screen as
shown in Figure 4-51. The target list is necessary for the Access Control Rule.
Figure 4-51 Target Settings
Target Description -
Here displays the description about the target and this description is
unique.
Information -
The target can be IP address, port, or domain name.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the
Add New…
button.
2. In
Mode
field, select IP Address or Domain Name.
If you select
IP Address
, the screen shown is Figure 4-52.
1) In
Target Description
field, create a unique description for the target (e.g.
Target_1).
2) In
IP Address
field, enter the IP address of the target.
3) Select a common service from
Common Service Port
drop-down list, so that the
Target Port
will be automatically filled. If the
Common Service Port
drop-down list
doesn’t have the service you want, specify the
Target Port
manually.
4) In
Protocol
field, select TCP, UDP, ICMP or ALL.
If you select
Domain Name
, the screen shown is Figure 4-53.
