NI-707534
Wireless Router 300N
- 52 -
Protocol -
The protocol used for this application, either
TCP
,
UDP
, or
All
(all protocols
supported by the Router).
Status -
The status of this entry, either
Enabled
or
Disabled
.
To setup a virtual server entry:
1. Click the
Add New…
button, the next screen will pop-up as shown in Figure 4-32.
2. Select the service port you want to use from the
Common Service Port
list. If the
Common
Service Port
list does not have the service that you want to use, type the service port
number or service port range in the
Service Port
box.
3. Type the IP Address of the computer in the
IP Address
box.
4. Select the protocol used for this application, either
TCP
,
UDP
, or
All
.
5. Select the
Enable
to enable the virtual server.
6. Click the
Save
button.
Figure 4-32 Add or Modify a Virtual Server Entry
Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click the
Save
button.
Click the
Enable/Disabled All
button to make all entries enabled/disabled.
Click the
Delete All
button to delete all entries.
