NI-707534
Wireless Router 300N
- 67 -
4. Click “
Access Control
→
Rule
” in the left to return to the Access Control Rule
Management page. Select “
Enable Internet Access Control
” and choose "Deny the
packets not specified by any access control policy to pass through the Router".
5. Click
Add New...
button to add a new rule as follows:
In
Rule Name
field, create a name for the rule. Note that this name should be
unique, for example Rule_1.
In
Host
field, select Host_1.
In
Target
field, select Target_1.
In
Schedule
field, select Schedule_1.
In
Action
field, select Allow.
In
Status
field, select Enable.
Click
Save
to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.11.2 Host
Choose menu “
Access Control
→
Host
”, you can view and set a Host list in the screen as
shown in Figure 4-48. The host list is necessary for the Access Control Rule.
Figure 4-48 Host Settings
Host Description -
Here displays the description of the host and this description is unique.
Information -
Here displays the information about the host. It can be IP or MAC.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the
Add New…
button.
2. In the
Mode
field, select IP Address or MAC Address.
