APEX 200 USER MANUAL
16
7-1
Option 1: Rear Housing Installation
7.
Quick Start Instructions
A.
B.
Place the rear facing
alignment guide on the
mounting position and drill
four Φ2.5 mounting holes
according to the markers
on the alignment guide.
Mount the device with four
M2 screws.
USE THE ALIGNMENT GUIDES TO DRILL HOLES FOR SETTING DEVICE SCREWS.
THE THERMAL DEVICE WILL ACCUMULATE HEAT DURING OPERATION. ICI
RECOMMENDS MOUNTING THE THERMAL DEVICE TO METALLIC OBJECTS
AT ITS REAR HOUSING WHICH CAN REDUCE DEVICE HEATING AS WELL AS
DECREASE THE TEMPERATURE DRIFT OF THE DETECTOR.
DO NOT USE TOO LONG SCREWS WHEN INSTALLING THE FRONT/REAR
MOUNTING BRACKET. USING SCREWS THAT ARE TOO LONG MAY DAMAGE
THE THERMAL CAMERA.
THE MAXIMUM HOLE DEPTH OF THE FRONT SHELL IS 10 MM (0.4 IN), AND
THE MAXIMUM HOLE DEPTH OF THE REAR SHELL IS 4 MM
(0.16 IN)
.
