APEX 200 USER MANUAL
10
THE ENCAPSULATION RATING IS ONLY APPLICABLE WHEN ALL OPENINGS
ON THE CAMERA ARE SEALED WITH THEIR CORRECT COVERS, HATCHES, OR
CAPS. THIS INCLUDES ANY CONNECTORS. ENCAPSULATION RATING DOES
NOT EXTEND TO AFTER MARKET ATTACHMENTS, WORK PERFORMED BY A
THIRD PARTY, OR CUSTOM INSTALLATIONS.
•
Do not solder directly onto the battery. Damage to the battery may occur.
•
Do not get water or salt water on the battery or device or permit the device
or battery to get wet. Damage to the battery may occur.
•
Remove any water or moisture on the battery before you install it. Damage
to the battery may occur.
•
If there is a leak from the battery and the fluid gets into the eyes, do not
rub the eyes. Flush well with water and immediately get medical care.
•
Always dispose of battery in accordance with local, state and federal
regulations.
•
Do not use the battery if, when used, charged, or placed in storage, there
is an unusual smell from the battery, the battery feels hot, changes color,
changes shape, or is in an unusual condition. Speak with a sales office if
one or more of these problems occurs.
•
Clean the case with a damp cloth and a weak soap solution. Do not use
abrasives, isopropyl alcohol, or solvents to clean the case or lens/screen.
•
Be careful when cleaning the infrared lens. Do not clean the infrared lens
too vigorously. This can damage the anti-reflective coating.
•
Avoid condensation. Taking the imager from cold to hot will cause
condensation in thermal imager. To protect the imager, power on the
device and wait until it becomes warm enough for the condensation to
evaporate.
•
Keep device out of reach of children.
•
Storage: If you do not use the imager for a long period of time, put the
device in a cool and dry environment. Store the device in an ambient
temperature of -40 °C to 70 °C (-40 °F to 158 °F).
