Installation
18
DOOR OPENING
The door is adjusted in the factory with standard opening to the left (Sx) and hinges on the right (Dx).
120 - 140 - 180 models
For
120
,
140
,
180
models, the door is opened by “pulling” and moving it from the left (LH) to the right (RH).
Before opening the door:
–
close the gas line shut-off valves and disconnect the pipes
–
loosen the 4 nuts (1) and pull the door, which will slide and move towards the right (RH).
To move it towards the left (LH), operate as described in the following paragraph DOOR OPENING INVERSION.
1
250 - 320 - 420 - 555 - 700 - 780 - 850 models
250 - 320 - 420 - 555 - 700 - 780 models
The door is factory set with a standard opening from the left (LH) to the right (RH).
m
IMPORTANT
The hinges of the opening side must have the nut (1) loosened and the conical washer (2) positioned towards the
base of the adjustment tie-rod.
a
DANGER
IT IS DANGEROUS TO UNSCREW
the ring nuts (3) of the door rotation hinges. Unscrewing them could cause the
detachment of the door, with possible severe damages to persons and property.
Before opening the door:
–
close the gas line shut-off valves and disconnect the pipes
–
use the lever (4) to unscrew and extract the ring nuts (5) of the two hinges on the opening side of the door and pull it
carefully.
4
3
5
1
2
Hinge of rotation
door side
Hinge of opening
door side
