icetro IM/IM-1100-RC, User Manual

Page: 12 / 36

2. Installation
6. Upon completing processes up to no. 5, attach the
included slide bracket. (Attach the folded upper part
of the slide bracket by hanging it on the container.
Tighten the screws between the lower bracket and
upper slide bracket.)
Slide bracket
Bracket
7. Install the protective cover so that moisture from
the container of the ice maker above will not be
accumulated in the control box, both in the upper
and lower parts, as in the figure.
8. Refer to the figure on the right, which
shows the completed installation.
Protective cover
Slide bracket
Bracket
9. Attach the front panel and assemble the upper cover.
Attach the included fixing shafts on both sides so
that the installed product will not be affected
Fixing shaft
by external shock.
Installation has been completed.
12