icetro ID-0450-AN Manual Download Page 3

Page: 3 / 32

Warning

1. Safety Precautions

When there is a risk of causing physical problems such as death or serious injury
in the event of improper use.

When injury or damage to property such as house or furniture may occur
in the event of improper use.

This ice maker was produced exclusively for 115V.

115V should be used.

Warning

Caution

SHOULD BE DONE

PROHIBITION

GROUNDED

DO NOT

DISASSEMBLE

DO NOT

TOUCH

DISCONNECT

POWER PLUG

◆ An electrical fire may be caused by a receptacle holding
more than one item.
◆ Do not use an adapter or an extension cord.

Use a single receptacle for the ice machine.

If wet towels are wet, there is a risk of electric shock.

◆ A fire may occur if plug is not cleaned.

Clean the plug if covered in foreign material or dust etc.
with a clean, dry towel.

Clean the plug

115V

Summary of Contents for ID-0450-AN

































Search results

Summary of Contents for ID-0450-AN

Reviews:

Related manuals for ID-0450-AN

Brands by name

Popular brands

icetro ID-0450-AN, Manual

Search results

Summary of Contents for ID-0450-AN

Reviews:

Related manuals for ID-0450-AN

Brands by name

Popular brands