icetro ID-0450-AN, Installation & Service Manual

Page: 20 / 49

Item Contents
Dump Solenoid
1. Energized for 2 seconds after 1 hour of machine operation.
2. This is repeated indefinitely until the power is turned off.
Dispense Lever Operation
1. Chose a dispensing option (ice, water, or ice + water) and place cup against lever to
engage it.
2. If dispensing lever is released and immediately engaged again, there will be a 2
second delay before any solenoids will activate, regardless of which mode is
selected.
3. Once the dispensing lever is disengaged, all operation stops immediately.
Ice Dispensing Solenoid
(Ice Mode)
1. Energized when the dispensing lever is engaged, and the N/O switch is closed.
2. De-energized when the dispensing lever is released, and switch opens again.
3. Maximum operating time is 20 seconds by default but can be changed.
4. If ice hopper is full, the gear motor will also energize to dispense ice.
Ice & Water Dispensing Solenoid
(Ice + Water Mode)
1. Ice & water solenoids are both energized simultaneously when the dispensing lever
is engaged, and the N/O switch is closed.
2. Maximum operating time of the ice solenoid is 5 seconds by default but can be
changed.
3. Maximum operating time of the water solenoid is 3 seconds by default but can be
changed.
4. If ice hopper is full, the gear motor will also energize to dispense ice.
Detailed Operation
Sequence
20