iCentral System One M200, Installation Manual

Page: 33 / 44

29
29
 – Sets the number of door stations that do not have an inbuilt or
associated external camera. Options are 1, 2 or 3. If “2 NONCAM DOOR STN” is selected, door
stations 2 & 3 (wired to VLC2 and VLC3) will be the door station without cameras. If “2 NON
CAM DOOR STN” is selected, door station
No. 3 (wired to VLC3) will be the door station without a camera.
Note: The maximum combined number of CAMERA and NONCAMERA door stations is 3 (in total)
 – Sets the number of stand alone cameras
(not associated with door stations)
Note:  The maximum combined number of door station and stand alone cameras are 3 (in total)
 Door station cameras are connected to camera inputs beginning at CAM 1 and stand alone cameras are then
connected to the remaining camera inputs.
AUDIO OPTIONS MENU
 – Increases or decreases the radio volume throughout the entire system.
 – Increases or decreases the auxiliary music volume throughout the entire
system.
Note:  The above levels are best set so that music is heard at a comfortable level at the room stations with
their volume controls set for normal communication levels
 The above adjustments can be used to balance the volume levels for radio and auxiliary music so
they are approximately equal when switching between them.
 – Allows the volume level for communication at the master to be preset
to a desired level.
Note:  In normal operating mode, adjusting the volume using the and – keys while receiving communication
changes the programmed Local Comms Volume level.
 In normal operating mode, adjustment using the and – keys, while receiving communication or door chime,
adjusts the local communication level and is independent of the music level.
 In normal operating mode, adjustment using the and – keys, while receiving music, adjusts the local music
level and is independent of the communication level.
VIDEO OPTIONS MENU
 – Selects the camera input to be adjusted. (Camera 1, 2 or 3)
 – Adjusts brightness for selected camera.

– Adjusts contrast for selected camera.

– Adjusts colour for selected camera.
Note: Initially adjusting Camera 1 also makes identical adjustments for cameras 2 and 3
Once Camera 2 or 3 is adjusted, the adjustments then become independent of each other