iCentral System One M200, Installation Manual

Page: 37 / 44

33
33

ENTERING PROGRAM MODE
Press PRIV and MON buttons simultaneously.
The red LED will flash the current station number.
When all programming options have been entered, press CLEAR to exit PROGRAM mode.
ROOM STATION CODING
For the purpose of Select Calling (calling individual or grouped stations), each station must be
allocated either a Single Digit or Double Digit number. If the same number is allocated to more than
one station, the stations having the same number will form a group. Allocating a number to a station
is done by means of keypad programming as outlined below.

Single Digit format is the default setting intended for systems requiring up to 7 select call channels.
This format offers the convenience of calling individual or grouped stations by pressing only one
button.
If not previously programmed, the station will be in the default Single Digit format where, in
program mode, the red LED will repeatedly flash a string of 1 to 7 flashes representing the
programmed Single Digit number (Default number = 1).
Enter a number between 1 and 8 by pressing the corresponding button. The red LED will now
repeatedly flash the new programmed number.
Exit PROGRAM mode by pressing CLEAR, or remain in PROGRAM mode to program more
options.

Double Digit format is a programming option intended for systems requiring from 8 to 21 select call
channels.
This format requires that two buttons be pressed in sequence to call individual stations.
If not previously programmed, the station will be in the default Single Digit format where, in
program mode, the red LED will repeatedly flash a string of 1 to 7 flashes representing the
programmed Single Digit number (Default number = 1).
Press the AUX button to toggle to Double Digit mode.
In Double Digit mode the red LED will repeatedly flash the following information.
 2 quick flashes representing Double Digit mode
 1 to 3 flashes representing the first digit (default = 1)
 1 to 7 flashes representing the second digit (default = 1)
Enter a Double Digit number in the ranges of, 11 to 17, 21 to 27, or 31 to 37 (21 possibilities)
The red LED will repeatedly flash the following information.
 2 quick flashes representing Double Digit mode
 1 to 3 flashes representing the first digit of the new number
 1 to 7 flashes representing the second digit of the new number
Exit program mode by pressing CLEAR or remain in PROGRAM mode to program more options.
Note:  Single and Double Digit format cannot be mixed in one system.
 Each station is to be individually programmed to the same format.
 Repeated pressing of the AUX button, while in program mode, will toggle between Single and Double Digit formats.