17
Keypad Duress Alarm
The DUreSS alarm can be used
to send a silent alarm to the central
station that you are being forced to
disarm the panel against your will.
That is - you are disarming under
“duress.”
To disarm and send a DUreSS
alarm, prefix your User Code with
one of the digits 5, 6, 8 or 9 when
disarming.
* The Keypad DUreSS is normally
not enabled. To enable this
function, consult your installer.
* DUreSS alarms can only used
by systems which are monitored by
a Central Station.
* The DUreSS alarm can be
programmed to sound the internal
siren (reset output). This option is
Off by default.
To trigger the keypad Duress Alarm, add
a special digit before your user code when
disarming.
Touch
+
+
A valid user code.
You can precede your user
code with any of the digits
5, 6, 8 or 9.
your system will now be disarmed and
a silent Duress alarm is sent to your
central monitoring station.