ICELED ZEN, User Manual, Page: 5 / 15

www.IceLed.co.uk
IceLed ltd ZEN GUIDE v4
5
Basic operation
Press the orange power button to turn all Zones on or off.
At switch-on the
most recently selected program will be
restored. Alternatively, press any numbered button to
activate the corresponding program directly. In either case
ZEN enters
Program Play mode and each Zone shows its
own programmed colours.
Remote display
The remote display normally shows the active program
number but will also provide other useful information
depending on the mode of operation. A blank display except
for small glowing dot indicates that the control unit is in
Standby mode and power consumption is reduced to a
minimum.
Selecting programs
In addition to the number buttons 0-9 the and buttons labelled p can be used
to step sequentially through each of the 10 preset programs plus the ‘Lightning’
strobe effect. The strobe effect differs from the other programs in ways that will be
described after the general descriptions. Normally a smooth transition will be
generated between one program and the next. Once the highest or lowest program
has been reached, the buttons will cease to step any further in that direction.
Program recall
Each program recalls a number of private settings that can be adjusted to generate a
unique lighting arrangement. Settings that apply to each individual Zone are preset
in
Program Edit mode while those equally applicable to all zones are adjusted ‘live’
in Program Play mode. The following table summarises the settings recalled
whenever a new program is selected.
Setting Zone 1 Zone 2 Zone 3 Zone 4
Adjusted
Home Colours
HSL HSL HSL HSL
Zone Options
Free UFO
Mute Lock
Free UFO
Mute Lock
Free UFO
Mute Lock
Free UFO
Mute Lock
In Program
Edit mode
Sweep speed
Min–max
Colour Range
Manual, 1–9, unlimited, random
Audio effect
Level–hue–saturation
Beat divider
Pattern a–d,
1:1 1:2 1:4
Live
in
Program
Play mode
Demonstration mode
ZEN can be instructed to make a continuous sequence of random program
selections on its own. A new random selection is initiated on each press of
the
p<p button shown left. If an audio trigger is present each new
random program will be selected in time with the music.
If ZEN is in
Standby when this button is pressed it will automatically switch on. Any
other button-press immediately cancels Demonstration mode and restores manual
program selection.
p p