9
CARE AND MAINTENANCE
DO NOT USE BOILING WATER BECAUSE IT MAY DAMAGE THE PLASTIC PARTS. IN ADDITION,
NEVER USE A SHARP OR METALLIC INSTRUMENT TO REMOVE FROST AS IT MAY DAMAGE
THE COOLING SYSTEM AND WILL VOID THE WARRANTY. IF NECESSARY, USE A PLASTIC
SCRAPER.
Cleaning The Unit
Turn the temperature control to “0” , unplug the unit and remove any food and the shelves.
Clean the inside surfaces with a warm water and baking soda solution. The solution should be about
2 tablespoons of baking soda to 1.13 litres of water.
Clean the shelves with a mild detergent solution.
Squeeze excess water out of the sponge or cloth before cleaning the controls or any electrical parts.
Clean the outside of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry
with a clean soft cloth.
Replacing the Bulb
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long
service life. In case of any abnormality, please contact the after-sales personnel for visiting service. The
lamps can only be replaced by the manufacturer,together with a part of the appliance.
FAILURE TO UNPLUG THE UNIT COULD RESULT IN AN ELECTRICAL SHOCK OR PERSONAL INJURY.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
unit if you minimize the number of times the door is opened. If the power is going to be off for a
longer period of time, you need to take the appropriate steps to protect your food.
Holidays
Short Holidays: Leave the unit operating during holidays of less than 3 weeks.
Long Holidays: If the appliance will not be used for several months, remove all food and unplug from
the socket. Clean and dry the interior thoroughly. To prevent odour and mould growth, leave the door
slightly open for ventilation, wedging it open if necessary.
Moving The Unit
Remove all the food.
Securely tape down all loose items inside the unit.
Summary of Contents for RL114W.E
Page 11: ...11 WIRING DIAGRAM ...
