Iceking RL114W.E, Installation And Operating Manual

Page: 8 / 15

8
FIGURE 1
FIGURE 2
Door opening from the right side
1. Screws
2. Lower hinge
3. – 4. Levelling legs
5. Upper hinge
6. Upper hinge cover
7. Hole cover plate
8. Screws
OPERATING THE UNIT
Se ng the Temperature Control
The unit only has one control for regulating the temperature of the refrigerator. The temperature
control is located on the inside of the appliance (top right).
The first time you turn the unit on, set the temperature control to position “6”.
The range of the temperature control is from position “0” to “6”. After 24-48 hours adjust the
temperature control to the setting that best suits your needs.Setting “3” should be appropriate for
home or office use.
To turn the appliance off, turn the temperature control to ”0 ”.
NOTE: Turning the temperature control to “0” position stops the cooling cycle but does not shut
off the power to the unit. If the unit is unplugged, has lost power or is turned off, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start.
Door opening from the l side