Iceking RL114W.E, Installation And Operating Manual

Page: 6 / 15

6
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY WHEN USING THE APPLIANCE FOLLOW THESE
BASIC PRECAUTIONS:
Read all instruc
ti
ons before using the refrigerator.
WARNING: C hild entrapment and su
ff
oca
ti
on are s
ti
ll a danger. Old or abandoned refrigerators are s
ti
ll
dangerous even though they are not being used.
Before you throw away your old refrigerator: Remove the doors but leave shelves in place so that
children cannot climb inside.
Never allow children to operate, play with or crawl inside the refrigerator.
Never clean refrigerator parts with
fl
ammable
fl
uids. The fumes can create a
fi
re hazard or an explosion.
Do not store petrol or any other
fl
ammable liquids in the vicinity of this or any other refrigerator. The
fumes can create a
fi
re hazard or an explosion.
If the power cable is damaged, it must be replaced by the manufacturer, its service agent or similarly
quali
fi
ed person in order to avoid a hazard.
INSTALLATION INSTRUCTIONS
Before Using The Appliance
Remove the exterior and interior packaging.
Check to ensure that you have the following parts: 2 shelves and the instruction manual.
Before connecting the unit to the power source and switching it on, let it stand upright for
approximately 2 hours. This will reduce the risk of a malfunction in the cooling system from movement
during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
Installing The Appliance
This appliance is designed to be free standing only and should not be recessed or built-in.
Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level your
unit, adjust the levelling legs at the bottom of the unit.
Allow 125mm of space between the back and sides of the unit which allows sufficient air circulation to
cool the compressor and the condenser.
Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase the electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to perform properly.
Avoid locating the unit in moist areas.
Plug the unit into an exclusive, properly earthed wall socket. DO NOT, under any circumstances, cut
or remove the 3rd pin from the plug or earth wire from the power cable. Any questions concerning
earthing should be directed to a qualified electrician or authorised service company.
After plugging the appliance into a wall socket, allow the unit to cool down for 2-3 hours before placing
food inside the refrigerator.