Icegame DB1200X, Service Manual

Page: 67 / 87

67
Debit Card Housing use:
Molex 9-pin housing 03-09-2092
Universal Card link Connection
See Wiring Insert for wire colors and which connections are used.
Pin 1. +12v- Supply to Card System = Minimum of 2A available for the card systems and a Max of 3A.
Pin 2. Coin 1 - input to the game PCB.
Pin 3. Prize Meter/Ticket Notch 2- is connected to the Ticket Notch line between the game PCB and ticket dispenser.
Optional.
Pin 4. Coin Meter 1 - is connected to the coin meter 1 output from the game PCB and can be used by card systems for
monitoring purposes.
Pin 5. Ticket Run/Enable 2- is connected to the ticket run line between the game PCB and ticket dispenser. Optional.
Pin 6. Prize Meter/Ticket Notch 1- is connected to the Prize or Ticket Meter output from the game PCB and can be
used by card systems for monitoring purposes. Optional.
Pin 7. Coin Inhibit/Enable- is connected to the Coin or Note Inhibit/Enable output from the Game PCB and is used
where the game has this feature for disabling any payment. This is normally for states like New Jersey that limit the
amount of money that can be inserted at one time.
Pin 8. Ticket Run/Enable 1 - is connected to the ticket run line between the game PCB and ticket dispenser in standard
redemption games. This is commonly used for systems using paperless or E-ticket. Not Used if the game doesn’t have
this output.
Pin 9. Ground- is connected to the common Ground connection, the same ground as the Game PCB.