Icegame DB1200X, Service Manual

Page: 24 / 87

24
AA6212 1/4 X 3/4 FLAT
WASHER BLACK AA6584 1/4-20 X 2 (BLACK)
STEP 18a:
Position 2C target assembly to the left and 2D target assembly to the right at the back of the
cabinet. Align the hole at the bottom of the towers with the holes already at the back.
STEP 17:
Lay the (2C) left and (2D) right Towers on their backs. At the bottom of the (2C) left tower should be
one network cord and two DC connections (one small, one large). Carefully pull them out and
ensure no damage has been done to the network cable. At the bottom of the (2D) right tower should
be two network cords and two DC connections (one small, one large). Carefully pull them out and
ensure no damage has been done to the network cables. It might be possible that the network
cables can “catch” on internal wiring inside the towers. Wiggle the cable up, down, back and fourth
until it is free.
Secure using three AA6584 black Allen bolts and
AA6212 black washers.
Use the Allen wrench
to access the back bolt inside.
X’S 6