Reference: A938
Index: B
Page 81
This document is the property of ICE SAS. It can not be reproduced or communicated to third parties without authorization.
Instruction Manual – NPS914 Alarm and Indication IED
If both of the GOOSE publisher data sets are un-checked, the GOOSE publisher service is disabled
(see the image below).
Figure. 7.1.4. - 3. Data set editing window.
All of these data sets can be edited. The data set editing dialog is opened by clicking on the selected data set
to be edited and then clicking the "Edit" button. The editing dialog shows all currently configured entries
of the data set. An entry can be removed from the data set by clicking the red "-" button located at the end
of the entry's row. New entries can be added and old ones edited by clicking the green "+" button at the top
right of the window. For URCB and BRCB data sets it is recommended that the data is selected on the
doName (data object) level (see the image below). This way all available information (such as status, quality,
and time) is always sent in the report. Data can also be selected on daName (data attribute) level, which
selects each individual piece of data. This approach may be preferred for GOOSE data sets.
Figure. 7.1.4. - 4. Data selection on the data attribute level.
