22
OPERATOR MANUAL
/ / -OB /
NOTE:
Solution will not begin to flow until the control handle bail is pulled.
Check the solution flow indicator (see
Panel components, item #5), press the
solution flow control button (see Panel
components, item #6 and 7, see Fig 12,
blue buttons on the bottom) to a de-
sired flow rate.
Turn on the vacuum motor switch (see
Panel components, item #10, and Fig.
13).
:
Pull the control handle bail
(see machine components, item #2)
backwards to start scrubbing by mov-
ing the machine forward.
(See Fig. 15)
The drive model / :
Pull the control handle bail (see ma-
chine components, item #2) backwards
to start scrubbing. (See Fig.15)
The machine will automatically propel
forward. To reverse the drive model,
simply push the control handle bail
forward.The speed can be adjusted,
adjust the speed control button (see
Panel components, item #13, 15 (#8 if
you got a machine with the new pan-
el), see Fig. 14) to a desired scrubbing
speed.
5.
6.
7.
Figure 12
Figure 13
Figure 14
