24
OPERATOR MANUAL
/ / -OB /
WHILE OPERATING THE MACHINE
1.
2.
3.
4.
5.
Go slow on inclines and slippery sur-
faces. Do not operate the machine on
inclines that exceed
5 % (3 °).
Do not keep the machine in the same
position with pad/ brush spinning,
keep the machine
moving to prevent damage to floor
finish.
If the squeegee assembly leaves
streaks on the floor, raise the squeegee
off the floor and wipe the blades down
with a damp cloth. Pre-sweep the area
to prevent leaving streaks on the floor.
Pour a recommended defoamer into
the recovery tank if excessive foam
appears.
WARNING:
Fire or explosion hazard. Do not pick up flammable
materials or reactive metals.
WARNING:
Do not allow foam to enter the float shut-off screen,
vacuum motor damage will result. Foam will not activate the float shut-off
screen.
Occasionally check the battery meter
(see Panel components, item #2).
when the battery is very low, stop
scrubbing and recharge the batteries.
(See Fig. 17, upper left corner of the
Panel)
Figure 17
